Minuteman ERide 21, Руководство по обслуживанию

Страница: 69 / 91

10. Miscellaneous Systems
The significant maintenance/replacement procedures relating to
Miscellaneous systems are described in this chapter
10.1 TIGHTENING SCREWS AND NUTS CHECK
1. If there is recovery water and cleaning solution (or washing water) in the
corresponding tanks, empty them (See the procedure on the User and
Maintenance Manual).
2 If available place the machine on a lifting platform; otherwise place the 2. If available, place the machine on a lifting platform; otherwise, place the
machine on a level floor.
Make sure that the machine cannot move independently.
3. Turn the ignition key to the "0" and take it out.
4. Remove the battery holder drum and disconnect the battery connector (6,
Figure 3-4 ) (For the g ) (
procedure, see the User and Maintenance Manual).
5. Lift the cover (1, Figure 10-1 ), and remove the panel (2) by lifting it up.
Continue with the check the following:
•of the tightening of the screws and nuts accessible
•of the correct position of the various fastening elements
f f •that there are no visible faults of various parts and components
•that there are no leaks of various liquids
6. Refit the various parts, by reversing the sequence of operations performed
for disassembly.