Minuteman ERide 21, Руководство по обслуживанию

Страница: 24 / 91

5.6 CLEANING THE SPRAY NOZZLE AND FILTER ON
CYLINDRICAL BRUSH DECKS
1. If available, place the machine on a lifting platform, then lift. Otherwise,
place the machine on a level floor.
2. Operating on the machine's controls as provided for in the User and
Maintenance Manual, lower the cylindrical brush deck, then turn the
ignition key to “0" (off) and remove key.
3 f f 3. Locate the spray nozzle in the front of the cylindrical brush head head,
unscrew the ring nut (1,
Figure 5-5 ) and recover the nozzle (2) and the
seal (3).
4. Remove the filter from the housing (4).
5. Clean the nozzle (2) and the filter (4).
6 Correctly reposition the filter (4) in its housing 6. Correctly reposition the filter (4) in its housing.
7. Position the nozzle in the housing (2) and the seal (3), then screw the ring
nut (1).
8. Turn the ignition key to the "I“ (on) and wait for the lifting of the cylindrical
brushes, and then turn the ignition key to “0” and take it out.