Minuteman ERide 21, Руководство по обслуживанию

Страница: 76 / 91

10.7 DISASSEMBLY/ASSEMBLY RECOVERY WATER
DRAIN HOSE
Removal
1. Empty the recovery water tank (see the procedure in the User and
Maintenance Manual).
2. If available, place the machine on a lifting platform, and raise it up;
otherwise, place the machine on a level floor. Make sure that the machine
t i d d tl cannot move independently.
3. Turn the ignition key to the "0" and take it out.
4. Operating on the left side of the machine, loosen the strap well (1, Figure
10 7 ) and then disconnect the recovery water drain hose (2) from the tank 10-7 ) and then disconnect the recovery water drain hose (2) from the tank
coupling. If necessary, to facilitate the removal of the hose from the tank,
open the battery drum (3) (See the procedure in the User and Maintenance
Manual).
5 R th h (2) f th hi 5. Remove the hose (2) from the machine.
Assemble
6. Assemble, by reversing the sequence of operations performed for
disassembly.