Minuteman ERide 21, Руководство по обслуживанию

Страница: 23 / 91

1 Remove the brush (For the
5.5 CLEANING NOZZLE AND FILTER FOR DISPENSING
CLEANING SOLUTION TO DISC BRUSH
1. Remove the brush (For the
procedure, see the User and
Maintenance Manual).
2. If available, place the machine
on a lifting platform, then lift.
Otherwise place the machine on
Otherwise, place the machine on
a level floor.
3. Turn the ignition key (2, Figure
3-2 ) to position "0".
4. Locate the nozzle in the center 4. Locate the nozzle in the center
of the brush hub (1,
Figure 5-4 )
unscrew the nut (2) and retrieve
the nozzle (3) and the seal (4).
5. Remove the filter from the
housing (5).
6. Clean the nozzle (3) and the
filter (5).
7. Correctly reposition the filter (5)
in its housing.
in its housing.
8. Position the nozzle in the
housing (3) and the seal (4),
then screw the ring nut (2).
9. If positioned, remove the
machine from the lifting platform
machine from the lifting platform.
10. Reinstall the brush (For the
procedure, see the User and
Maintenance Manual).