23
Configuration: Mail
This allows the administrator to setup the email notification. When an event occurs, the RPM can send out
email messages to predefined accounts.
Email Server:
Enter the Hostname or IP address of the SMTP Mail Server that will be used to send emails.
If entering a Hostname, you are also required to enter the DNS Address, see the Configuration Network tab.
Port:
Enter the port number for the SMTP server. The default port is 25.
TLS/SSL:
Check this box if using secure email.
Email Server Requires Authorization:
Check this box if the Mail Server requires authentication to send
emails.
Account Name:
Enter the account name if SMTP authentication is required.
Password:
Enter the password if SMTP authentication is required.
Test:
Input the recipient’s email address.
Click on the Send button to send the test email.
Click Apply to save all of the settings.
The email message format is as follows:
Indicates the Outlets A ~ H-XXXXXXXX status in order
When X=0: It means the outlet is off.
When X=1: It means the outlet is on.
NOTE:
The email recipient’s email address must be entered in the Configuration User tab.
