16
Management: Ping Action
This allows the administrator to Ping the device that is connected to a specific outlet and if there is no response
the RPM will automatically cycle power to a locked device connected to the specified outlet by rebooting the
outlet.
Outlet:
Select which outlet to perform the Outlet Action.
IP Address:
Set the IP address of the device to be monitored by the RPM.
Response 5 minutes:
The RPM will ping the assigned IP address once each minute. If the device does not
respond, then the RPM will repeat the ping once every minute, if the device does not respond after 5
attempts (5 minutes), the RPM will carry out the assigned action automatically.
Action:
Select the outlet action “OFF, ON, ON/OFF or “OFF/ON”
Add:
Enables this function.
To delete a Ping action, select the action from the list and select Delete.
