22
Configuration: User
This allows the administrator to add users and give them specific rights.
No.:
This is the number of users. The maximum number of users is eight.
User:
This is the user’s login name. The default administrator’s name is
snmp
.
Password:
This is the user’s login password. The default password for the administrator is
1234
.
Permission:
Administrator: Full authority to monitor, control and configure RPM. Default name is
snmp
and the default
password is
1234
.
Power user: Monitor the RPM, control the specified outlets. No permission to configure RPM. Default
password is password.
View Only: Monitor the RPM only. No permission to control or configure the RPM. Default password is
password.
Email:
Enter an email address for the recipient you want to receive the notification.
To add a new user:
1. Enter the user name and then click New.
2. Enter the password
3. Confirm the password
4. Select the Permission rights
5. Enter the email address if the user is to receive emails
6. Select the pencil icon (Modify) to save the settings.
Select the X icon (Delete) to delete a user.
Note:
See the Management Device tab to give each user rights to specific outlets.
