19
If the RPM is unplugged from the main power before the start-up sequence is completed, the outlets, which were
not turned on will remain off. The next time the RPM is plugged into the main power, these outlets will not be
automatically turned on. These outlets can only be turned on via the web interface.
Management: Threshold
This allows the administrator to configure the thresholds for the environmental probe, the entire RPM and each
individual outlet.
ENV Threshold Configuration:
Set the lower and upper thresholds for the optional environmental probe
then click Modify to change the settings. Once these thresholds are set see the management Event Actions
to configure the actions based on these thresholds.
Device Threshold Configuration:
Set the warning and overload thresholds for entire RPM then click
Modify to change the settings. Once these thresholds are set see the management Event Actions to
configure the actions based on these thresholds.
Outlet Threshold Configuration:
Set the warning and overload thresholds for each individual outlet then
click Modify to change the settings. Once these thresholds are set see the Management Event Actions to
configure the actions based on these thresholds.
