Minolta MAGICOLOR 3300, Руководство пользователя

Страница: 154 / 194

Time-of-Day Clock 146
1
Turn off the printer, and
then disconnect the
power cord and all
interface cables from the
printer.
2
Loosen the screws and
pull the controller board
from the printer.
WARNING!
Because the time-of-day clock includes an internal battery, there is a
danger of explosion if the clock is incorrectly installed or replaced.
Replace it only with a supported MINOLTA-QMS time-of-day clock.
Dispose of any used time-of-day clock in accordance with local laws
and regulations.
3
Attach the time-of-
day clock to the
controller board.
Attention
Make sure that the pins on the time-of-day clock are properly aligned
with those in the receiving socket on the controller board. Damage
to the time-of-day clock and/or controller board could result if the
pins are misaligned.
a
Locate the time-of-day clock socket on the controller board and the pin
1 notch or printed label.
b
Locate the pin 1 indicator mark on the top of the time-of-day clock.
This mark may be a notch or a slight depression on one end of the
clock.
IIIIIIII
IIIIIIII
IIIIIIII
IIIIIIII
IIIIIIII
IIIIIII
III
IIIIIIII
IIIIIIII
IIIIIIII
IIIIIIII
II
IIIIIII
IIIIIIII
IIIIIIII
IIIIIIII
IIIIIIII
IIIIIIII
IIIIIII
III
IIIIIIII
IIIIIIII
IIIIIIII
IIIIIIII
II
IIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIII IIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIII
II
Pin 1 indicator
Pin 1 notch/label