Minolta MAGICOLOR 3300, Руководство пользователя

Страница: 90 / 194

Introduction 82
Introduction
This chapter explains automatic jam recovery, discusses how to locate,
remove and prevent media jams, presents tables of common status
messages, and actions you should take when a specific problem occurs, and
provides information to aid you in resolving printer problems you may
encounter, or at least guide you to the proper sources for help. You’ll also find
a problem checklist and the information you’ll need to have before placing a
service call if one becomes necessary.
Printing a Status Page
There are three kinds of status pages:
Standard—A one-page overview of the most common printer settings
used to confirm that your printer is printing.
Demo—A standard status page with the addition of three graphics.
Advanced—Information about printer parameter settings, fonts, and
emulations available. The document may have many pages, depending
on the fonts installed. Print an advanced status page in case you need to
restore any current settings.
Select the type of status page you want to print through the Administration/
Special Pages/Status Page Type menu. Then print it in one of the following
ways:
On the printer’s control panel press the Print Status? button.
Use the printer’s Administration/Special Pages/Print Status menu.
Direct PDF File Printing
our printer has the ability to print PDF files directly just as it does for
PostScript and PCL files. This can be a time-saving feature. Direct printing
removes the need to open the file in an application, such as Acrobat Reader,
then print the file via a PostScript or PCL driver. You printer supports PDF
version 1.3 and below. The PDF file can be sent to the printer using any
method (lpr, ftp, etc.) that is normally used to print PostScript or PCL files.
Direct PDF printing requires an optional internal hard disk.
Adjusting Memory Clients for PDF Printing
The unique structure of PDF files requires that you make some adjustments
to your printer’s default memory clients. All PDF files contain information at
the end of the files that is needed to correctly format them in the printer.