Minolta MAGICOLOR 3300, Руководство пользователя

Страница: 77 / 194

Replacing the Fuser Unit
69
8
Grip the unit’s levers, and gently lift it
out of the printer.
Dispose of the used fuser
according to your local
regulations.
9
Unpack a new fuser unit, lift up both
levers
, grip the fuser unit by the
levers, align it with the slots in the
printer, and slowly lower it
.
10
Completely push down both levers of
the fuser unit.
11
Lock the fuser unit by sliding the two
side locks backwards.
12
Close the covers , .
13
Continue with the media feed roller(s)
replacement. “How do I replace the
media feed roller(s)?” below.
How do I replace the media feed
roller(s)?
1
1
2
2
1
1
The media feed rollers feed media from the
media tray(s) into the printer. When the media feed
rollers deteriorate, media may not feed
correctly from the media tray, resulting in media jams.
Replace the media feed roller in each 500-sheet media
tray each time you replace the fuser unit.
Three media feed rollers are included with the fuser unit. If you do not have a
high-capacity input feeder (HCIF), you will have one or two rollers left over.