Minolta MAGICOLOR 3300, Руководство пользователя

Страница: 93 / 194

Automatic Jam Recovery
85
Automatic Jam Recovery
The printer provides automatic jam recovery (when enabled through the
Administration/Engine/Page Recovery menu). After you remove any jammed
media, printing automatically resumes from the page the printer stopped at
when the jam occurred.
For automatic jam recovery to work, it is necessary to leave the printer
turned on when you remove the jammed media. After the jam is
cleared, open and close the front door before printing. Printing will not
resume until you do this.
Understanding the Media Path
Understanding the printer’s media path will help you locate media jams. The
media tray is located at the bottom front of the printer. The media is picked
from the tray, passed under the imaging and transfer units, passed through
the fuser, and delivered via the paper exit unit to the media exit tray, which is
the top of the printer.
Fuser unit
Toner cartridges
Duplexer
Imaging unit
Controller
Multipurpose tray
Output tray
Upper media tray
= Duplexer (available on the magicolor 3300
DN or the magicolor 3300 EN with an
optional duplex kit installed)
High-capacity input feeder
(2x500 HCIF shown in
illustration)
Transfer unit