Minolta CR-400 -, Инструкция по эксплуатации

Страница: 77 / 159

75
Data Processor Preparation
<CMC Parameter Setting>
The CMC parameter can be set anywhere in the range of 0.1 to 9.9.
See P.79 “Color Space and Changing the Display” and P.80 “Color Space and Color Difference Set-
ting” for details on setting conditions.
[Operating Procedure]
After steps 1 to 3 on P.74 “Setting a Displayed Color Limit”, perform following steps below.
4
Select the CMC parameter settings using the key.
5 Press the Measure/Enter key .
•
The cursor is displayed below the CMC parameter setting.
6
Set the CMC parameter using the key or the nu-
meric pad.
Input range: 0.1 - 9.9
7
Once the setting is complete, press the Measure/En-
ter key
to return to color space selection in the
displayed color limit screen.
•
Pressing the Escape key
Esc
returns to the previous screen.
Displayed color limit
screen (Page 1 of 2)
2,4
3,5,7
1
6
［ＤＩＳＰ． ＬＩＭＩＴ］１／２
ＸＹＺ ＯＮ
Ｙｘｙ ＯＮ
Ｌ＊ａ＊ｂ＊ ＯＮ
ＨＬａｂ ＯＮ
Ｌ＊Ｃ＊ｈ ＯＮ
ＣＭＣ ＯＦＦ
（ｌ：ｃ）＝（１．０：１．０）
ＣＩＥ１９９４ ＯＦＦ
Ｐ００
C P ［０００１］