Minolta CR-400 -, Инструкция по эксплуатации

Страница: 148 / 159

146
Description
Error Messages
ER00
COMMUNICATION
ERROR
Communication performed with inappropriate
command.
•
Cable unplugged during communication
•
Message garbled by external noise, etc.
•
Plug in cable with the power OFF.
•
Use a lower baud rate if noise is the problem.
ER01
MEMORY FULL
[Measuring Head]
1. Number of measurement data exceeds 1000.
2. Number of target color data exceeds 100.
[Data Processor]
3. Number of measurement data exceeds 2000.
4. Number of pages exceeds 100.
5. Number of target color data exceeds 100.
6. Number of user calibration channels exceeds
19.
7. There is insufficient room to transfer all data
to the data processor when importing mea-
surement data.
1. Connect to data processor and transfer data
there to free up some space, or turn OFF the
data protection setting.
2. Overwrite unnecessary target colors when
registering. Or create more space by connect-
ing to the Data Processor and deleting any
unnecessary target colors.
3,4. If you turn OFF data protect, the oldest
pages will automatically be updated. Or you
can delete some data to free up some space.
5. Overwrite onto unneeded target colors or de-
lete some to free up space.
6. Overwrite onto unneeded channels or delete
some to free up space.
7. Delete some pages or data to free up space.
ER02
LOW BATTERY
Battery voltage drop
•
Turn OFF the power and replace batteries or
use the AC adapter.
Xenon lamp does not flash properly.
•
Xenon lamp has malfunctioned.
•
Flash circuit has malfunctioned.
•
Faulty sensor
ER07
WHITE
CALIBRATION
INCOMPLETED
White calibration has not been performed.
•
Perform white calibration.
ER08
COMMUNICATION
ERROR
An overrun or other type of error occurred dur-
ing communication.
•
Cable unplugged during communication
•
Calibration, target color, or option settings
changed on the data processor without hook-
ing it up to the measuring head.
•
Plug in cable with the power OFF.
•
Change calibration, target color, or option
settings using the Measuring Head.
ER10
NO DATA
IN MEMORY
The data needed for that function to work is not
found.
•
Attempting to print or delete nonexistent data
•
Statistical operations or list displays in pages
without data
•
Store some data before attempting
ER05
ERROR
IN FLASHING
•
Repeat measurement.
•
If the problem persists, contact your nearest
Minolta-authorized service facility.
Message
Symptom/Possible Cause Corrective Acrion
The keys will not function if pressed when the error message is displayed.
ER06
OVERFLOW
Because of the excessively high reflectivity of
the measurement specimen, the operation of
measurement data exceeds the performance of
the instrument.
When Y is higher than 160:
•
Redo white calibration and the measurement.
•
If the problem persists, contact your nearest
Minolta-authorized service facility.