MINOLTA-QMS PagePro 4100E, Руководство пользователя

Страница: 98 / 213

6-2 Host-based lpd Configuration
6-23
U
N
IX
Conf
igurat
io
n
Chapt
er 6
The software installed with your SCO system should be sufficient to
satisfy most printing needs. SCO supplies ASCII-to-PostScript filters
that are invoked automatically whenever PostScript is specified as the
content type. The SCO UNIX lp system also supplies interface scripts
that generate PostScript banners. When necessary, you can use the
lpfilter command to define new filters and content types. The
installation provides you with the full power and flexibility of the lp
print service, and the fact that you are printing across the network is
totally transparent.
6-2-8 AIX RISC System/6000
The AIX printing subsystem is driven by the qdaemon program, which
uses data in the
/usr/lpd/qconfig
file to manage queues and route jobs
to the proper devices. This information includes entries for each
physical virtual printer and physical device known to the system.
Simply stated, an AIX virtual printer is a high-level software view of a
data stream, queue, and device that controls how a given job is to be
processed. A different virtual printer should be defined for each data
stream that is supported by a real printer. Even when PostScript and
PCL jobs are destined for the same printer, for example, each job uses a
different virtual printer.
Configuring a Network Card printer on an AIX system approximates
configuration of a local printer as nearly as possible. The one point
where it differs is that the physical device only difference is that the
physical device associated with the Network Card printer must be a
named pipe used by the print daemon to route data to the Network
Card.
The following shows the most straightforward way to add a printer to
the system.
1.
Type the following to run the installation script:
nicinst