MINOLTA-QMS PagePro 4100E, Руководство пользователя

Страница: 91 / 213

6-2 Host-based lpd Configuration
6-16
U
N
IX
Conf
igurat
io
n
Chapt
er 6
6-2-4 DEC ULTRIX 4.3
1. Type the following to run the installation script:
nicinst
The script automatically downloads the appropriate Network Card
utilities for your system and displays questions to prompt you for
the information it needs.
2. What is the node name of the Print Server Unit?
Input the host name recorded in
/etc/hosts
. For example, type
printfast
and then press .
3. What is the printer name?
Type the printer name and press
.
4. Here, the script displays the information you have input up to this
point.
Node name of the Printer Server Card:
printfast
Printer name to be used:
<printer name>
The printer is attached on: PORT 1
Check these settings and make sure they are correct. If they are
correct, type
yes
and press . Otherwise, type
no
and press
.
5. Is this printer PostScript?
Type
yes
and press is the printer is a PostScript printer. Oth-
erwise type
no
and press .
6. The printcap entries you have made up to this point appear on the
display and the script confirms whether you want the entries writ-
ten into the
/etc/printcap
file. Type
yes
if you want the entries
added to printcap and then press . If you do not want them
added, type
no
, press and then manually make the required
changes to the entries.
<printer name>
| Print Server Card printer:\
:lp=/dev/
<printer name>
:\
:if=/usr/nic/infilter:\
:sd=/usr/spool/
<printer name>
:
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Enter