MINOLTA-QMS PagePro 4100E, Руководство пользователя

Страница: 88 / 213

6-2 Host-based lpd Configuration
6-13
U
N
IX
Conf
igurat
io
n
Chapt
er 6
4. Use the tar command to load the software from the CD-ROM. At
this time the system displays a list of Network Card files copied by
tar.
5. Run the installation script for your system in accordance with
appropriate procedure below.
6-2-2 Selecting Filters
There are a number of options available when executing the script for
each type of system.
When you run an installation script, it first asks if the printer is a
PostScript printer. If you reply
no
to this question, the install script
uses an input filter (infilter) that performs CR/LF translation for
printing of ASCII files on a PCL printer. If you reply
yes
, the printcap
file references psfilter, which provides easy ASCII-to-PostScript
conversion.
Normal PostScript format files are not affected. Proprietary and public
domain filters are also available for more versatile filtering capabilities.
6-2-2-1 Selecting a Filter Manually
The Network Card comes with an input filter named psfilter, and an
output filter named psbanner for printing of PostScript banners. To use
these filters, you must change the infilter (
:if=
) and outfilter (
:of=
)
entries in
/etc/printcap
. The following shows an example of how this
is done.
<printer name> | Printer Server Card printer:\
:lp=/dev/nic/ <printer name> :\
:if=/usr/nic/psfilter:\
:of=/usr/nic/psbanner:\
:sd=/usr/spool/ <printer name> :