MINN KOTA Ultrex 1368800, Руководство пользователя

Страница: 37 / 61

ADJUSTING THE LOWER UNIT FOR A SECURE STOW
STOWING AND DEPLOYING THE MOTOR
To Deploy the Motor
Make sure that the Hold-Down Strap is not secured and then
simply pull back and lift the motor off of the mount with
the Pull Grip and Cable. Lower the motor into the water using
the Pull Grip and Cable. The motor will lock into the deployed
position. Once the motor is deployed, make sure it is seated
and locked into position.
To Stow the Motor
Pull back and lift the motor out of the water with the Pull Grip and Cable. Guided by the Pull Grip and Cable, the lower unit will
drop down in the motor rest. The motor will lock into the stowed position. Once the motor is stowed, make sure it is seated and
locked into position. Wrap the Hold-Down Strap over top of the motor shaft to secure the motor. When stowing the motor, it
automatically disables the operational function of the foot pedal or paired remote. Motor stowed will be displayed on the screen
of any applicable remote.
a. Before transporting the boat over water or land,
stow the motor to determine where the Lower
Unit rests on the Mount.
1
b. If the Lower Unit does not sit on the Mount
Ramps, deploy the motor so the Depth Collar can
be loosened and the motor can be adjusted to
allow it to rest on the Motor Ramps.
MOTOR ADJUSTMENTS
When the Motor is stowed, the Lower Unit should rest on the Mount Ramps just inside the Motor Rest on the Motor Mount. It
is recommended to secure the motor using the following instructions to avoid damage to the motor and shaft from vibrations
during transport.
Adjusting the Lower Unit for a Secure Stow
NOTE:
The correct positioning of the Lower Unit
will place it directly on the Mount Ramps located on
the Mount Rest.
Shaft Yoke
Lower Unit
Mount Ramps
Mount
Mount
Mount Ramp
Mount Rest Area
CAUTION
The Lower Unit should be placed on the Mount Ramps within
the Motor Rest Area every time the motor is transported. If
the Lower Unit is improperly placed, either above or below the
Motor Rest Area, damage to the Lower Unit or Shaft will occur
and the Shaft will be incorrectly captured in the Yoke. Not
following the recommended placement for the Lower Unit will
cause damage to the product and void your product warranty.
WARNING
When stowing or deploying the motor, keep fingers clear of all
hinges, pivot points and all moving parts.