miniDSP Ltd – Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
19
4.3
C
ONFIGURING FOR MEASUREMENT
Start Dirac Live Calibration Tool Stereo for miniDSP (if it is not already running).
Be sure to quit the DDRC-2 Utility program before starting Dirac Live Calibration Tool for miniDSP.
Running the two programs at the same time may result in communication conflicts and odd behavior.
The main areas of the screen are:
Logo and status progress bar
This area shows a progress bar with current status when the program is performing calculations.
Screen selection tabs
Each tab selects a different step of the calibration process. These are generally worked through
in order, from top to bottom. This section covers the first four tabs; the final two are covered in
Filter Design
.
Load and save a project
Each measurement project can be saved to a file and reloaded at a later time. See
Saving and
loading projects
.
Back to previous / proceed to next
Use these two buttons to advance to the next tab when each is complete, or to go back to the
previous tab to make alterations. The tabs at the left can also be clicked on directly.
Help open/close
Click on the small Help divider at the right of the screen to open a pane with help on the
currently selected tab. Click on the divider again to close the help pane.
