miniDSP Ltd – Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
20
4.3.1
Sound System tab
The Sound System tab is preset for you, provided that you have your Dirac Series audio processor and UMIK-1
connected to the computer via USB.
Choose system configuration
Preset to Stereo Speaker System. This is the only configuration supported by stereo Dirac Series
processors.
Test signal playback device
Preset to DDRC-22 (miniDSP Ltd). This will ensure that test signals are sent into your audio
system via the Dirac Series processor. (If this is not present, check that your processor is
connected via USB and powered on, then click the Rescan button.)
Once you have verified that this tab is correct, click the Proceed button.
4.3.2
Mic Config tab
On the Mic Config tab, set the following parameters.
Recording device
Preset to the UMIK-1. (If this is not present, ensure that
the UMIK-1 is connected securely to the computer via
USB, then go back to the Sound System tab and click on
Rescan. Then select the “Microphone” item underneath
“UMIK-1”, as shown at right.)
