miniDSP Ltd – Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
10
1.3
D
IRAC
S
ERIES
/
D
IRAC
L
IVE
®
CONFIGURATION STEPS
The steps for configuring your Dirac Series audio processor with Dirac Live® are as follows:
1.
Connect the Dirac Series audio processor into your system and install
software. See Section 2,
Hardware Connectivity
and Section 3,
Software Installation
.
2.
Run a series of acoustic measurements using the Dirac Live
Calibration Tool Stereo for miniDSP program, to capture the
acoustic behavior of your speakers and room. See Section 4,
Acoustic Measurement
.
3.
Generate digital room correction filters that will be executed by
the Dirac Series processor. Up to four filter sets can be downloaded
into the processor for easy real-time recall and auditioning. See
Section 5,
Filter Design
.
4.
Once the digital room correction filters are designed and
downloaded, the computer can be disconnected, as computer
connectivity is not required for normal listening. See Section 6,
Using the Dirac Series Audio Processor
.
