Then attach the upper right
screw. To get the holes con-
centric you must press now the
end of the boom to the upper
end of the fuselage (compress
the foam).
Finally mount the upper left
screw.
When you mount now the
landing bows be careful that
you do not scratch the surface
of the fuselage. To minimize
this risk press fi rst the wire
into the front hole. Look before
that holes in the fuselage and
landing bow holder under the
mechanic are corresponding. If
not then open the four fuselage
mounting screws again and
press the fuselage a little bit in
teh right direction. Alternatively
you can widen the hole with a
thin needle fi le.
