manualshive.com logo in svg

minicopter Diabolo S, Руководство пользователя

Поделиться
Скачать
minicopter Diabolo S Скачать руководство пользователя страница 2

Congratulations to your new Diabolo S, one of the fastest model helicopters. This model was 

created to reach the highest possible speed under highest possible power with best possi-

ble aerodynamic. The Diabolo S was designed without any comromise. It is extremly small, 

the fuselage section has a shape like a symmetrical airfoil to minimize drag. To mount all the 

mechanics and electronics into it you need some informations what is the intention of this ma-

nual. For the basic mechnical assembly you can also use the classical Diabolo manual. The 

assembling technic of the Diabolo and Diabolo S mechanics are very similar. Only the parts 

are a little bit different, so there is a part-no. translator attached. This manual was created 

to show the special differences of this model including some assembling and justation hints.  

Have fun with the assembly and if you have any questions you can  send us an e-mail to 

[email protected] . We wish you also a lot of fun with the fl ights of your Diabolo S!   

Recommended equipment:

Motor: X-Nova 4535-510 4+4 YY1.6      Pyro 850-50L       Pyro 750-50/56 BE
Controller: Kosmik 200 Cool14s    YGE320HV16s
Servos: Servos like BLS451 with max 18mm from mounting surface to upside servo arm
FBL-System: BD3-(S)X, AC-3X, V-Stabi
Receiver: 2,4GHz
Flight battery: 2x7s/4400/>60C -2x8s/3850/>60C
Receiver battery: 2s/1600-1800/25-30C (alternativly combine with Kosmik BEC on 8,0V) 
Rotorblades: DH691 or DH711

These are components we have tested and we can recommend. Of course you can use 
compinents from other  manufacturers too, but you must decide individually if they are ok 
for the Diabolo S or not. 

Содержание Diabolo S





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды