All servo cables should be un-
der the mechanic right now.
Now mount the roller block.
The best is to attach fi rst the
screws and from inside the
spacers. Then add the roll
servo cables between and add
Loctite on the screws threads.
Then add the roller block.
During tightening have an eye
on it that the cables are not
squeezed beteen the contact
planes of the parts. The re-
sult (with a contacted impulse
cable) could be sudden move-
ments of the servo arms.
For better identifi cation when
you plug in the connectors in
the fl ybarless system it makes
sense to add a „R“ and „L“ on
the roll servo cables.
