MingTai SUN12, Руководство по эксплуатации

Страница: 6 / 19

4
5.2 The air-cooling window attached to the exterior surface of the Steam Sterilizer
shall be non-clog by dust or articles, and the Steam Sterilizer shall working in the
proper air flowing environment,and n
o dangerous flammable and explosive gas.
Equipment normal working conditions
：
environment temperature ： +5 ～ +40℃
Relative humidity
：
≤85
％
barometric pressure ： 70kPa ～ 106kPa
minimum brightness: 215
±
15 lx,
5.3 The Steam Sterilizer shall be installed on the horizontal working base. Put
machine on the table, refer to specifications, table must be able to bear the weight
of the machine.
The clearance between the outside of Steam Sterilizer and the
around articles shall be 10cm as retained, and the top surface shall be 20cm
retained.
Used to exhaust or drain.
5.4 The 2 front feet of Steam Sterilizer can be adjusted the height, please ensure
the front of machine slightly higher than the back.
5.5 The machine will be hot during working time, keep it away from any
combustible materials!
The equipment must be far away from flammable items
5.6 After placing the Equipment
Check whether the power supply is in conformity with the requirements: 230 ~, 5
0 hz, voltage fluctuation range
±
10%, power supply ≥2300 VA(23L),1800VA(8L&12L&16&18L).
In order to ensure the safety of the person and equipment, must be equipped a
ground wire,the equipment casing and the ground wire of the control cables must
be connected to external ground wire reliable .
Must use the attached plug, do not change it.