Minebea Intec PR 5211 Series, Инструкция по эксплуатации инструмента, Страница: 74 / 96

Function number 91 SetParam Write parameters (value R20 after Para-
meter R21)
Function number 92 GetParam Read parameters (value R21 after R20)
Function number 93 SaveConfig The configuration parameters are saved
in EAROM.
Analog output (parameter 1…3)
I/O parameters (parameter 4, 6)
Input/Output configuration (parame-
ter 5, 7)
Access control (parameter 99)
7.2.5.14 Function number 112…119, 125: transition-controlled action bits (write)
For setting bits, see Chapter 7.2.2.3 .
As soon as the bit has been set, it is reset internally and the process is carried out; this
process is transition-controlled (for one write operation).
The bit is set as Write_Value_Select with the specified number (see Chapter 7.2.2.3 ).
Function number 112 SetZero
Function number 113 SetTare
Function number 114 ResetTare
Function number 115 SetTest
Function number 116 ResetTest
Function number 117 ResetPwf
Function number 118 SetFixTare (function number 86, see Chapter 7.2.5.13 ).
Function number 119 GetFixTare (function number 87, see Chapter 7.2.5.13 ).
Function number 121 ResetError
Function number 122 SaveProcess
Function number 123 SetParam
Function number 124 GetParam
Function number 125 SaveConfig
Note:
To prevent frequent writing to the EAROM, the write interval should be no shorter than
15 seconds.
Transmitter Series PR 5211 7 ProfiBus interface
Minebea Intec EN-72