Minebea Intec MP30, Руководство пользователя

Страница: 7 / 12

7
PROGRAMMING MENU
The programming menu of the indicator is accessed by pressing the
PAR
key. The menu is organized into modules, which group together
parameters which are related in function. Use the arrow keys to select the module, then press PAR to enter the module. The PAR key stores the
selected parameter and simultaneously indexes to the next parameter. ( Note : Since many parameters are dependent on the scale division setting, it is
recommended to scale the display first, then set the other parameters.)
DISPLAY PARAMETER RANGE AND UNITS
DESCRIPTION/
COMMENTS
INP
x
StYLE
PtS
baNd
Display Value for
Scaling Point x
Input Value for
Scaling Point x
Scaling Style
Scaling Points
Filter Enable Band
-19999
to
19999
-19999
to
99999
KEY
- key-in data
2
to
12
0
to
250
scale
divisions
fILtr Filter Setting
0.0
to
25.0
seconds
DISPLAY PARAMETER
50
- round by 50
100
- round by 100
RANGE AND UNITS
DESCRIPTION/
COMMENTS
rANGE
Input Range
0.2v
- ± 240 mV
0.02v -
±
24 mV
PARAMETER MODULE 1 - Input Configuration Parameters
round
dECPt
Scale Divisions
Decimal Point
Position
Select scale divisions
Select scaled decimal
point position
10
- round by 10
0.000
2
- round by 2
0.0
20
- round by 20
0.0000
5
- round by 5
0.00
1
- round by 1
0
Sets the digital filter time
constant.
0 = disabled
Select Scaling technique.
Procedure resets zero function.
Select # of scaling points
0 = filter always on
∆ = reading - previous reading
filter on :
∆
< band
filter off : ∆ > band
dSP
x
Key-in or apply input value
for scaling point x. If applied,
press PAR to accept signal.
Decimal point follows range
selected.
Key-in display value for
scaling point x. Decimal
point follows that assigned.
Select the input range
Set the input range
jumper to match the
selection
PARAMETER MODULE 2 - External Input and Front Panel Function Key Configuration Parameters
DISPLAY PARAMETER RANGE AND UNITS
DESCRIPTION/
COMMENTS
Maintained Reset
Active = Reset
LIst
- Select main or
alternate setpoint list
r-1
- Reset setpoint 1
r-2
- Reset setpoint 2
USr-2
USr-1
*
*
*
*
*
*
*
*
*
*
**
User Input
Function
no
- no function
pLOC
- Lock parameter list
USr-3
rEL
- Acquire zero
Settings = 0, 3, 8, 15
Active = Reset
Active = Function
Active = Min
Active = Function
Active = Max
Active = Enable
Active = Enable
Active = Reset
Active = Total
Active edge = Batch
Release from active =
Synchronize
Active = Hold
Active = Net
User Input #1, #2, and
#3 programming.
Active = Lock
d-rEL
- Select net/gross
display
d-HLd
- Hold Display
a-HLd
- Hold all functions
sync
- Synchronize meter
readings
bat
- Store batch
readings in totalizer
d-tot
- Select total
display
rtot1
- Reset totalizer
rtot2
- Reset and enable
totalizer
E-tot
- enable totalizer
d-hI
- Select max display
r-hI
- Reset, display and
enable max reading
d-Lo
- Select min display
r-Lo
- Reset, display and
enable min reading
r-HL
- Reset max and min
DISPLAY PARAMETER RANGE AND UNITS
DESCRIPTION/
COMMENTS
Active edge = acquire or
clear tare
Maintained Action
Active = Print
Momentary Action
Sc-F2 Second F2 *
Momentary Reset
r-tot
- reset totalizer
r-3
- Reset setpoint 3
Sc-F1 Second F1 *
bat
- batch totalizer
r-4
- Reset setpoint 4
*
r-Lo
- reset min
LIst
- Select main or
alternate setpoint list
*
r-hI
- reset max
*
r-HL
- reset max and min
Maintained Reset
Active = Reset
r-1
- Reset setpoint 1
r-3
- Reset setpoint 3
r-34
- Reset setpoint 34
r-aLL
- Reset all setpoints
r-34
- Reset setpoint 34
r-234
- Reset setpoint 234
r-2
- Reset setpoint 2
**
r-aLL
- Reset all setpoints
tArE
- Acquire/Clear tare
print
- Print Request
r-4
- Reset setpoint 4
**
r-234
- Reset setpoint 234
APLY
- apply
calibration weights
F1
Tare Key
no
- No function
F2
Zero Key
rEL
- Acquire zero
rst Print Key
d-rEL
- No function
tArE
- Acquire/Clear tare
print
- Print Request
Active edge = Zero
Keypad function
programming. These
keys can be
programmed to different
functions. Function is
executed when key is
pressed. Hold key for 3
seconds for second
function.
main =
Lod-A
alternate =
Lod-b
* No function in “B-GNT” mode.
** No function in “HILOT” mode.
d-LEv
-Change display
intensity level
Active = Alternate
main =
Lod-A
alternate =
Lod-b