Mindman MAER200 Series, Руководство по обслуживанию

Страница: 6 / 16

6
Wiring method
When the monitor output is not being used, prevent it from touching the other wires as this can
cause a malfunction.
When a current of approx. 125mADC or more is applied, the over current is archived, "Er6"
is displayed and the operation stops. Please turn off power supply and check the cause of
overload current or lower the current load under 125mA, and then restart the power supply.
Wiring diagram (Monitor output)
WARNING
(MAER200-*-*-*2) (MAER200-*-*-*3)
1: Brown
3: Blue
2:
White
4: Black
1: Brown
3: Blue
2:
White
4: Black
Switch output
．
NPN type Switch output
．
PNP type
Load
Load
(MAER200-*-*-*1)
Please select a device with a load
impedance greater than 1KΩ
(MAER200-*-*-*4)
Please select a device with a load
impedance less than 750Ω
1: Brown
3: Blue
2:
White
4:
Black
1: Brown
3: Blue
2:
White
4:
Black
Analog output
．
Voltage type Analog output
．
Current type (source type)
Monitor output voltage Monitor output current
DC4~20mA (source type) DC1~5V