8
Error indicating function
Be sure to confirm the product specification and the following items before use.
Please confirm that the supply pressure is correct.
Please confirm that the power supply and input signal is correct.
Despite the error indication function, this product may malfunction if the power or signal
exceeds the specification range.
CAUTION
1
2
3
Display
Contents of error
Countermeasure
E r 1
Input signal
exceeds the rated
value range
E r 2
Er3
Output pressure
did not reach the
set value for ten
seconds or more
consecutively
Er4
Er5
Er6
Out of range
error of zero clear
Over current errors
in switch output
Check controller power specifications, set power
voltage and input signal within the rated range, and
turn power ON again.
Caution: This product has this error indication function,
but the input is too large or not specified, it may cause
direct burnout or malfunction. Please confirm the
specifications before use.
Please contact us when MAER do not operate normally
after restarting the power supply.
1. Check the supply pressure within the rated range.
2. Check that there is no leakage from the pipes, fittings,
or other components, correctly connect the pipes and
turn on the power again.
3. Try increasing the gain value to improve the situation.
If you restart the power supply after the above method, you
still cannot improve the situation. Contact your nearest
Mindman sales office or distributor.
Wait three seconds or press any key to return setting.
Please operate "zero clear" after the secondary pressure
of MAER is became to atmosphere. Please operate "zero
clear" within the range of 5%F.S..
Please turn off power supply and check the cause of
overload current or lower the current load under 125mA,
and then restart the power supply.
Reading or writing
errors occurred in
EEPROM
Error occurred setting
the range of the min.
and max. pressure
