10
Setting linearity of output pressure to input signal
Set the minimum and maximum value of output pressure corresponding to the input signal.
Note: This function is current input and voltage input type only.
The adjustment like making the relation of F_1 > F_2 is not available. If you try doing, an error
ER4 will be indicated. You must be return to set F_1 and F_2.
F_1 is adjustable in range from 0% to 50% of the rated value. (DEFAULT VALUE: 0%)
F_2 is adjustable in range from 10% to 100% of the rated value. (DEFAULT VALUE: 100%)
Function introduce
Operation flow
Control pressure %
Input signal %
0 100
120
50
0
0 0 0
0 100
Control pressure %
Input signal %
100
0
-10
50
Unlocking key
Press
Press
Press
F = 1
F = 2
Press /
key to adjust
Press /
key to adjust
9 0 0
Save setting and
return to RUN mode
....
