Minarik RG501A, Руководство пользователя

Страница: 39 / 44

31
Certificate of Compliance
Minarik Corporation hereby certifies that its RG501A drive has been
approved to bear the “CE” mark provided the conditions of approval have
been met by the end user.
The RG501A has been tested to the following test specifications:
EN55011:1991 (emissions), and
EN50082-1:1992 (immunity)
Compliance allows the RG501A to bear the CE mark.
The end user, as described herein, falls into one of two categories:
1. The Consumer will deploy a stand-alone unit as an integral, yet external,
portion of the machine being operated.
2. The Original Equipment Manufacturer (OEM) will implement the product
as a component of the machine being manufactured.
AC Line Filters
In addition to EMI/RFI safeguards inherent in the RG501A design, external
filtering is required.
Minarik requires the Corcom
®
AC line filters listed in Table 4. Use model
5VR1 with drives rated for 3 ADC or below, and model 20VV1 with drives
rated for 10 ADC or below.
Table 4. AC Line Filters
Corcom ® Model Number 5VR1 20VV1
Rated Current 5 A 20 A
Inductance 1.032 mH 0.88 mH
Capacitance
Line to Line 0.303
µ
F 0.303
µ
F
Line to Ground 0.011
µ
F 0.011
µ
F
Discharge Resistor 680 K
Ω
680 K
Ω
Wire the AC line filter within 0.25 meters of the drive. The ground
connection from the filter must be wired to solid earth ground
(resistance less than 500 ohms); not machine ground. This is very
important!
If the end-user is using a CE-approved motor, the correct filter from Table 4
is all that is necessary to meet the EMC directives listed herein.
250-0234 rev 1.qxd 3/12/99 11:14 AM Page 31