11
Operation
Before applying power
•
Verify that no conductive material is present on the printed circuit
board.
•
Set all switches to their proper settings.
•
Verify that the AC supply is properly balanced.
Startup
1. Set the power switch to
0
(off); set forward and reverse speed adjust
potentiometers to 0; set FWD JOG and REV JOG trimpots to 50%
(12 o’clock).
2. Apply AC line voltage.
3. Set the power switch to
I
(on). The LED above
STOP
is lit.
3. To rotate the motor in the forward direction:
a. Press
FWD
. The LED above it lights.
b. Set the forward speed adjust potentiometer until the motor rotates
at the desired forward speed.
To rotate the motor in the reverse direction:
a. Press
REV
. The LED above it lights.
b. Set the reverse speed adjust potentiometer until the motor rotates at
the desired reverse speed.
5. To switch the direction of motor rotation, press the pushbutton of the
opposite direction.
6. Press
STOP
to stop the motor.
m
250-0234 rev 1.qxd 3/12/99 11:14 AM Page 11
Содержание RG501A
