MIMAKI tx300p Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 130

MIMAKI tx300p Скачать руководство пользователя страница 22

Chapter 1 Before Use

1-8

Media sensor

The media sensor detects the presence of the media and the
media length.
This machine has two media sensors on the platen (in the rear).

Carriage

The carriage is provided with the ink heads for printing,
the “LED pointer” to be used for manually setting the width
of the set media (

A lever is also provided to adjust the height of Head
according to the thickness of media. (

Capping station

The capping station consists of the ink caps, the wiper for
cleaning the heads, etc.
The ink caps prevent the nozzles in the ink heads from
drying up.
The wiper cleans the nozzles in the heads.
The wiper is consumable.If the wiper is deformed or the
media is stained, replace the wiper with a new one.

Pinch rollers and Grit rollers

This machine retains the media with the pinch rollers and
grit rollers. During printing operation, the grit rollers feed
the media forward.

• When setting a media, be sure to cover the media

sensors located on the rear of the platen. The
media cannot be detected unless it is placed over
the sensor.

Media sensor

• Be sure to wear the attached goggles in cleaning

within the capping station to protect your eyes
against ink. Otherwise, you may get ink in your
eyes.

• Keep the pinch rollers lifted up when this machine

is not in use. If the pinch rollers are left lowered
for an extended period of time, they can be
deformed and fail to securely retain the media.

Grit roller

Pinch roller

«
...
20
21
22
23
24
...
»

Содержание tx300p



































































































































Отзывы:

Нет отзывов