MIMAKI tx300p Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 130

MIMAKI tx300p Скачать руководство пользователя страница 104

4-18

Chapter 4 Maintenance

Setting the Tube Wash Intervals

For setting the interval at which washing of the ink tubes
will be carried out, in order to prevent ink clogging due to
coagulation of ink inside the ink tubes.

1

Press

(MENU)

in LOCAL.

• MAINTENANCE MENU will be displayed.

2

Press

to select “AUTO

MAINTENANCE”, and press the

key.

3

Press

, and press

.

• “TUBE WASH” will be selected.

4

Press

to set the tube washing

interval, and press

.

•

Set value

: The set value will differ according to

the ink type being used.

5

Press the

key several times to

end the setting.

Setting the Cleaning Intervals and
Type

The cleaning type and the interval between each cleaning
operation are set.

1

Press

(MENU)

in LOCAL.

• MAINTENANCE MENU will be displayed.

2

Press

to select “AUTO

MAINTENANCE”, and press the

key.

3

Press

several times to select

“Interval” or “Type”, and press the

key.

4

Press

to select a set value, and

press the

key.

•

Set value

: The set value will differ according to

the ink type being used.

•

Set value of type

: NORMAL/ HARD

5

Press the

key several times to

end the setting.

Fill up Ink

Supplies ink to correct nozzle clogging.

1

Press

(MENU)

in LOCAL.

• MAINTENANCE MENU will be displayed.

2

Press

to select “FILL UP INK”,

and press the

key.

3

Press

to select the filling head,

and press the

key.

4

Press the

key.

• Ink is supplied automatically.

5

Press the

key several times to

end the setting.

• In order to perform tube washing with the

Automatic Maintenance Function, the
maintenance washing liquid needs to be set. If the
maintenance washing liquid is not set, tube
washing operation will not be regularly conducted
and the passage could be clogged.

«
...
102
103
104
105
106
...
»

Содержание tx300p



































































































































Отзывы:

Нет отзывов