MIMAKI tx300p, Руководство по эксплуатации, Страница: 62 / 130

3-4
Chapter 3 Setup
Register the optimal print conditions
to match the use
In this machine, you will be able to register print
conditions, SETUP 1 to 4 individually to match the media
in advance.
For example, after print on different types of media, return
to the media always use. In such case you can set the
optimum printing conditions by simply selecting the
registered SETUP 1 to 4.
Register the print conditions to SETUP 1 to 4
1
Press
(MENU)
in LOCAL.
2
Press to select SETUP 1 to 4,
and press the key.
• The item selected indicates
●
and others show
○
.
• SETUP MENU will be displayed.
3
Press to select and set each item
in the setup menu list.
• Please see the reference page in the setup menu
list for detailed configuration procedure.
How to use [Temporary]
[Temporary] is not only to set the print condition to be
used only once, but also can be used for partial change of
the registered SETUP "1 to 4", or for reflecting the print
conditions set by the [Temporary] to SETUP 1 to 4.

Register the print conditions in [Temporary]
Registration of the print conditions to [Temporary] can
be done as the same method as to SETUP 1 to 4.
1
Press (MENU) in LOCAL.
2
Press to select “Temporary”,
and press the key.
• SETUP MENU will be displayed.
3
Press to select and set each item
in the setup menu list.
• Please see the reference page in the setup menu
list for detailed configuration procedure.

Copy the contents of SETUP 1 to 4 to
[Temporary]
You can use it with changing the part of registration
contents of SETUP 1 to 4.
Select “copy” from the registration screen of [Temporary],
and specify the copy source (SETUP 1 to 4).
1
Press
(MENU)
in LOCAL.
2
Press to select “Temporary”,
and press the key.
• SETUP MENU will be displayed.
3
Press
(
<<).
4
Press to select “COPY”, and
press the key.
• Selection screen of the copy source will be
displayed.
5
Press to SELECT the copy
source (SETUP 1 to 4) and press the
key.
• Confirmation screen of the copy will be displayed.
6
Press the key.
• Settings selected in step 5 is copied to Temporary.
7
Press to select the setting item
to be changed, and press the key.
• Please see the reference page in the setup menu
list for detailed configuration procedure.
• Print conditions that can be pre-registered with the
machine are the four types, “SETUP 1” to “SETUP
4”.
• If you print with the print condition which do not
often use, you will be able to set the print
conditions by selecting "Temporary".
If turn on the power again, settings in "Temporary"
will return to the original state when it was
purchased.
Also if turn on the power again in “Temporary”
state, it will be the state in selecting “SETUP 1”.