4
ENGLISH
1.4 Radio Frequency Interface Requirements - Related to European installation
Note: This equipment has been tested and found to comply with the limits for a EN 300 440 v2.1.1 receiver
Category 3.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment is sensitive to other equipment that intentionally generates, radio frequency energy in the 2402-
2480MHz that may conduce to the instability to use the Remote Control on it. However there is no guarantee that
interference will not occur in a particular installation. If this equipment su
ff
er from the harmful interference from
another radio device to radio this can be determined by turning the respective equipment o
ff
and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Turn o
ff
the disturbance equipment
- Increase the separation between the disturbance equipment
- Consult the dealer or an experienced radio technician for help
1.5 EC-declaration of conformity
Hereby, Techtronic Industries GmbH declares that the radio equipment type M18SIM is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address: http://services.milwaukeetool.eu.
1.6 One-key™
To learn more about the ONE-KEY functionality for this tool, please reference the Quick Start guide included with
this product or go to www.milwaukeetool.com/one-key. To download the ONE-KEY app, visit the App Store or
Google Play from your smart device.
Also, when the product experiences ESD, the Bluetooth communication will be disconnected. It needs to be reset
manually to recover.
We considered the results to be within our minimum acceptable performance level according to EN 55014-2:2015
/ EN 301489-1 V2.1.1 / EN 301489-17 V3.1.1.
One-key™ indicator
Solid Blue
Wireless mode is active and ready to be con
fi
gured via the
ONE-KEY™ app.
Blinking Blue
Tool is actively communicating with the ONE-KEY™ app.
Blinking Red
Tool is in security lockout and can be unlocked by the
owner via the ONE-KEY™ app.
1.7 Batteries
Battery packs which have not been used for some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to
heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged, after used.
To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
1.8 Transporting lithium batteries
Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
Transportation of those batteries has to be done in accordance with local, national and international provisions
and regulations.
• The user can transport the batteries by road without further requirements.
470 424 - M18SIM - GB Print.indd 4
470 424 - M18SIM - GB Print.indd 4
01.07.2020 06:40:42
01.07.2020 06:40:42