16
ENGLISH
5.11 M18™ BATTERY
Both the WIRELESS MONITOR and CONTROL HUB are powered by an M18™ BATTERY. The battery condition
of both is always shown in the status bar on the WIRELESS MONITOR screen.
Recharge only with the charger speci
fi
ed for the battery. For speci
fi
c charging instructions,
read the operator's manual supplied with your charger and battery.
The icon to the left of the WIRELESS MONITOR icon represents the battery status of the CONTROL HUB while
the icon to the right represents the WIRELESS MONITOR.
The CONTROL HUB is powered by its M18™ BATTERY which is hot-swappable. If the battery is removed from a
running CONTROL HUB, the below message will appear warning that the CONTROL HUB is operating on the
internal backup battery for a period of nine minutes. During these nine minutes a charged M18™ BATTERY must
be installed, or a USB-C cable must be attached between the WIRELESS MONITOR and CONTROL HUB. The
USB-C cable will now power the CONTROL HUB temporally.
Typical battery life:
WIRELESS MONITOR: Nine hours on a fully charged battery
CONTROL HUB: Nine hours on a fully charged battery
5.12 Setting the LCD SCREEN SETTINGS
This setting adjusts the WIRELESS MONITOR LCD screen settings.
1. Go
to
SETTINGS
SCREEN SETTINGS
.
2. Use the navigation dial to navigate through the menu choices, press the navigation dial to select one.
3. Turn the navigation dial left and right to adjust the setting, press the navigation dial to accept it.
4. Scroll to the bottom of the sub-menu and press the navigation dial on OK to accept the changes.
CAMERA LIGHT
9.3FT
2019/10/23 01:47:57 AM
2020/04/17 11:30:45 AM
3.2M
CAMERA LIGHT
2020/04/17 11:30:45 AM
3.2M
2019_10_23_SCREEN
Replace Control Hub battery or
Connect Cable to Wireless Monitor
immediately
Time remaining : 08:51
Hue
Brightness
Contrast
Saturation
Backlight
50
50
50
50
8
Cancel
OK
470 424 - M18SIM - GB Print.indd 16
470 424 - M18SIM - GB Print.indd 16
01.07.2020 06:40:49
01.07.2020 06:40:49