23
ENGLISH
The LINE TRACE is now active, and the LINE TRACE icon with selected frequency will appear in the status
bar.
3. Deactivate the LINE TRACE mode by going to
LINE TRACE
and select OFF.
6.8 SONDE
SONDE - activates the SONDE transmitter attached at the end of the PIPELINE INSPECTION REEL termination
spring to locate the approximate position of the SONDE in the pipe. The choice of the SONDE frequency was
selected during setup and can be changed by going to
SETTINGS
SONDE FREQUENCY
. The choices of
SONDE frequencies to use are 33kHz, 512Hz or 640Hz.
- 33kHz – is useable in non-metallic pipes.
- 512Hz – is mostly used in North America and is useable in both metallic and non-metallic pipes
- 640Hz – is mostly used in Europe and is useable in both metallic and non-metallic pipes
Go to
SONDE
and press the dial. The SONDE is now active, and the SONDE icon will appear in the status
bar along with the frequency.
To deactivate the SONDE press the navigation dial when it shows the SONDE icon selected.
6.9 GALLERY
Overview
In the
GALLERY
, all the videos and pictures are shown organized in folders and stored for reviewing, editing,
exporting or deleting.
In the GALLERY view, each JOB folder is shown with the date and number of
fi
les in the job.
2019/10/23 01:47:57 AM
9.3FT
2019_10_23_SCREEN
LINE TRACE
33kHZ
2020/04/17 11:30:45 AM
3.2M
2020_04_17_JOB1
SONDE
640Hz
GALLERY
201910211052c
201910211052b
201910211052a
201910230518c
201910230518b
201910230518a
2019_10_21
2019_10_23
00:19
2019
/
10/21
00:18
2019
/
10/23
2019
/
10/23
2019
/
10/23
02:05
2019
/
10/21
01:02
2019
/
10/21
Stored Location:thumb drive
21/10/2019 ARCHIVOS:3
Stored Location:internal disk
23/10/2019 ARCHIVOS:6
470 424 - M18SIM - GB Print.indd 23
470 424 - M18SIM - GB Print.indd 23
01.07.2020 06:41:28
01.07.2020 06:41:28