9
ENGLISH
5 SETUP
This section of the manual covers setting up the features and options of the WIRELESS MONITOR. Mounting the
WIRELESS MONITOR to the PIPELINE INSPECTION REEL is covered in section 3.5 of the PIPELINE
INSPECTION REEL manual.
5.1 Power
on/o
ff
Press the POWER
button to power on the WIRELESS MONITOR.
The buttons and navigation dial will illuminate, showing that the power is on.
The WIRELESS MONITOR icon will appear in the status bar of the LCD along with the battery state.
Press the POWER
button for 2 seconds to power o
ff
the WIRELESS MONITOR.
5.2 First time setup
All the settings are saved into the WIRELESS MONITOR's memory and will remain there until changed. Note that
the settings will be lost if the unit is reset to factory defaults or by formatting the CONTROL HUB INTERNAL
DRIVE. The PIPELINE INSPECTION REEL with camera does not need to be connected to the WIRELESS
MONITOR for the
fi
rst-time setup.
These initial WIRELESS MONITOR settings will set the UNITS of distance measurement, DATE & TIME formats,
SONDE frequencies, VIDEO quality, IMAGE quality, CONNECTION SETTINGS and LANGUAGE.
These settings can also be performed through a tablet running the MILWAUKEE® PIPELINE INSPECTION APP.
5.3 Navigating through the settings menu
Navigation dial
- Turn the navigation dial clockwise or counter-clockwise to move through the menus.
While rotating the navigation dial, the position/menu items will be highlighted by the red cursor line.
Press the navigation dial to select and accept the setup menu options.
Back button
- Pressing the Back button while in any menu or sub-menu will take the screen back to
the previous menu. Press the Back Button repeatedly to return to the main viewing screen.
5.4 Setting the WIRELESS MONITOR LANGUAGE
It is recommended to set your LANGUAGE
fi
rst so that the other menus can be easily read and understood.
1. Go
to
SETTINGS
LANGUAGE
.
2. Select the desired
LANGUAGE.
3. Accept the on-screen message
The system will reboot and start in the language selected.
SETTINGS
MANAGE JOBS
2019/05/10 6 FILES
DATE & TIME
UNITS
FACTORY RESET
ABOUT
LANGUAGE
SYSTEM UPDATE
Feet
English
SCREEN SETTINGS
SERVICE & SUPPORT
SETTINGS
The control modules settings have been
changed. These changes will take effect
only after the control module has been
restarted.
CANCEL
OK
470 424 - M18SIM - GB Print.indd 9
470 424 - M18SIM - GB Print.indd 9
01.07.2020 06:40:46
01.07.2020 06:40:46