22
ENGLISH
Pan location reference
2020/04/17 11:30:45 AM
3.2M
2019_10_23_SCREEN
ZOOM & PAN
PAN
HORIZ
Left
Right
2019/10/23 01:47:57 AM
9.3FT
2019_10_23_SCREEN
ZOOM & PAN
PAN
VERT
Up
Down
Example of PANNING HORIZ, to the left
Example of PANNING VERT, up
4. Press the BACK
button to exit and return to the main viewing area.
6.6 Screen
ROTATE
Screen ROTATE
– will invert the upright picture 90° with each push of the navigation dial. This is helpful while
using the reel in the horizontal position, and the monitor may not be in an upright position.
1. Go
to
ROTATE
.
2. With each press of the navigation dial, the screen will ROTATE 90° to the right
2020/04/17 11:30:45 AM
3.2M
2020_04_17_JOB1
ROTATE
ROTATE
2020/04/17 1
1
:30:45
AM
3.2M
2020_04_17_JOB1
0 Degrees (default)
90 Degree position
ROTATE
2020/04/17 11
:30:45 AM
3.2M
2020_04_17_JOB1
ROTATE
2019/10/23 01:47:57
AM
9.3FT
2019_10_23_SCREEN
180-degree position
270-degree position
Note: The screen will remain in a ROTATE position until it is adjusted back to the default in this setting.
6.7 LINE
TRACE
LINE TRACE
– activates the internal transmitter to inject a locate signal onto the push cable. The length of
deployed push cable can now be located and traced above ground with a locator set to the matching LINE
TRACE frequency. The CONTROL HUB must be properly grounded when using the LINE TRACE feature. See
manual for CONTROL HUB covering the Grounding Post for additional information.
1. Go
to
LINE TRACE
.
2. Choose a LINE TRACE frequency of 33kHz, 65kHz or 83kHz and press the navigation dial.
2020/04/17 11:30:45 AM
3.2M
20120_04_17_JOB1
LINE TRACE
OFF
33kHz
83kHz
470 424 - M18SIM - GB Print.indd 22
470 424 - M18SIM - GB Print.indd 22
01.07.2020 06:41:11
01.07.2020 06:41:11