Millipore DIRECT-Q 3 SYSTEM, Руководство пользователя

Страница: 2 / 73

Notice
The information in this document is subject to change without notice and should not be construed as a
commitment by Millipore Corporation. Millipore Corporation assumes no responsibility for any errors that
might appear in this document. This manual is believed to be complete and accurate at the time of
publication. In no event shall Millipore Corporation be liable for incidental or consequential damages in
connection with or arising from the use of this manual.
We manufacture and sell water purification systems designed to produce pure or ultrapure water with
specific characteristics (
μ
S/cm, T, TOC, CFU/ml, Eu/ml) when it leaves the water purification system
provided that the Direct-Q Systems are fed with water quality within specifications, and properly maintained
as required by the supplier.
We do not warrant these systems for any specific applications. It is up to the end user to determine if the
quality of the water produced by our systems matches his expectations, fits with norms/legal requirements
and to bear responsibility resulting from the usage of the water.
Copyright
©
2006 MILLIPORE CORPORATION. PRINTED IN FRANCE. ALL RIGHTS RESERVED.
THIS BOOK OR PARTS THEREOF MAY NOT BE REPRODUCED IN ANY FORM WITHOUT THE
WRITTEN PERMISSION OF THE PUBLISHERS.
FTPF09550
REV. 3 – 12/08
Trademarks
Millipore and Direct-Q are registered trademarks of Millipore Corporation.
Millipak, Millex and BioPak are registered trademarks of Millipore Corporation.
The “M” Mark and SmartPak DQ3 are a trademark of Millipore Corporation.
Tygon is a registered trademark of Norton Co.
Velcro is a registered trademark of Velcro Industries, B.V.
All other trademarks are trademarks of their respective manufacturers.