Miller XT40 Torch, Руководство пользователя

Страница: 36 / 52

.
A complete Parts List is available at www.MillerWelds.com
OM-264 267 Page 32
8-3. Checking Or Replacing Filter Element
!
Turn power Off, and disconnect in-
put power plug from receptacle.
Check to see that all diagnostic
LEDs have stopped flashing before
removing wrapper from unit.
Remove wrapper from unit (see Section
8-2).
1 Filter Base
2 Filter
3 Filter Cup
Unscrew filter cup from base.
Remove cup.
Unscrew filter element from base.
Check filter element for dirt and moisture,
and replace if necessary.
Be sure that all parts are clean and dry.
Reinstall filter element, and secure filter
cup.
Reinstall wrapper.
Ref. 805 327-A / Ref. 264 954-B
Torx 25
Tools Needed:
1
2
3
8-4. Checking Shield Cup Shutdown System
Ref. 253 554-A
1 Torch Shield Cup
Turn Power On and loosen shield
cup. If shutdown system works
properly, Cup light comes on. If not,
immediately turn Off power and
have Factory Authorized Service
Agent check unit.
If system works properly, retighten
cup and reset power.
1
.
Power must be reset whenever the cup shutdown
system is activated.
Always turn Off power when
changing or checking consumables. Do NOT
overtighten torch shield cup. Gently finger tight-
en cup onto torch.