Miller Electric MPi 220P, Руководство пользователя

Страница: 37 / 80

OM-253 918 Page 31
5-9. Synergic MIG Welding Set-Up Menu
Ref. 956142881_12-A
To enter MIG welding set-up menu,
proceed as follows:
1
Sequencer Set-Up P2 Push
Button
2 Arc Length Control Knob
While in the set-up menu, use knob
to change sequencer parameters.
3
Sequencer
Adjustment/Operator Point
Setting P3 Push Buttons (See
Section 5-16)
4 Process Selection P1 Push
Button
Press and hold P2 push button to
enter the set-up menu. Sequencers
will be displayed on the digital meter
display. To change parameters, use
P3 push buttons or arc length con-
trol knob. To scroll through sequen-
cers, press and release P2 push
button. To exit set-up menu, press
and release process selection P1
push button. Desired parameters
will be stored.
5
Trigger Mode (2T/4T)
Use arc length control knob or se-
quencer adjustment P3 push but-
tons to change value (see Section
5-7).
6
Slope Time
Use Arc Length control knob to se-
lect amount of time that it takes to
slope up/down from initial amper-
age to weld amperage. To disable,
set to 0. When selected, use Arc
Length control knob or Sequencer
adjustment P3 push buttons to
change value, Default = 0.2
seconds (min = 0 sec, max = 1.5
sec).
7
Burnback Time (BBT)
Use Arc Length control knob to se-
lect amount of time that welding
wire stays energized after trigger is
released. When selected, use Arc
Length control knob to change
value. Default = 5 (min = 0, max =
10)
Press And Hold
1
4
2
3
SCROLL THROUGH SEQUENCERS
Press And Release
1
2
3
2T
0.02S
3
0%
0S
5
6
7
8
9
SET-UP MENU
3
0 3
0
0