MILLASUR Anova BIO150D, Инструкция по эксплуатации и техническому обслуживанию

Страница: 6 / 22

6
1. READ THIS MANUAL AND THE ENGINE MANUAL IN ITS ENTIRETY. These manuals contain
instructions for the safety and proper use of this wood chipper.
9. MATERIAL FEEDING. Do not hold tight to branches or bushes and let the machine drag the
material. The machine sometimes drags the material very quickly and can drag your hand if you
are gripping the material tightly. If the blades hit a hard object if the machine starts to vibrate or
make a strange noise, turn off the power immediately.
6. WORKPLACE. Place the shredder on a firm, flat surface of grass or earth. DO NOT place
the chipper on gravel, asphalt, concrete or stone. Chips are thrown with enough force to
ricochet off hard surfaces and cause serious injury. DO NOT locate the machine where sparks or
heat from the engine could cause a fire.
2. SAFETY EQUIPMENT. Wear safety glasses, hearing protection and gloves when working with
the chipper. Check that the people around you are also wearing safety equipment.
10. SWITCHING OFF THE SHREDDER. Shut off machine, wait for all moving parts to stop,
and disconnect spark plug wire before moving machine, emptying bag, unclogging intake or
discharge lines, filling fuel tank, or making any repairs or maintenance task.
7. SOLID FOUNDATION. Placing the shredder on a slope or slippery surface may cause the
operator to fall and strike the machine, which could result in motor burns or amputations if their arm
gets stuck in the chute.
3. ENGINE OPERATION. Consult the engine manual for information on handling and safety
guidelines applicable to a gasoline engine.
11. START-UP OF THE BIO-SHREDDER. Check that the hopper and funnel are empty when
you turn on the machine. The starter rope may stop suddenly, causing the machine to tip over
or injuring your hand.
Wear closed, non-slip shoes to ensure a firm footing.
4. HAND PROTECTION. DO NOT put your hands or any other part of your body into the
hopper, funnel, or spout while the blades are rotating. The chipper can pull you into the blades
causing amputations. To avoid burns, DO NOT touch the exhaust pipe while the machine is
running or immediately after it is turned off.
12. CLEANING OF THE SHREDDER. Wait for the engine to cool down. Then remove the
accumulation of dust and sawdust from the motor with a brush to avoid overheating or fire.
8. JAMS AND JAMS. Shut off the chipper, wait for all moving parts to stop, and disconnect
the spark plug wire before attempting to clear binding or jam.
5. APPAREL.
Do not wear loose clothing, ties, scarves, or jewelry that could get caught in moving
parts. DO NOT wear clothing or gloves with straps or clip-ons. These types of garments can
become entangled with the material to be shredded, trapping it in the shredder.
EN
CAVEAT
Additional Safety Instructions for Wood Chippers