MILLASUR Anova BIO150D, Инструкция по эксплуатации и техническому обслуживанию

Страница: 4 / 22

Indicates a potentially hazardous situation which, if not
avoided, will WARNING
Safety instructions for machinery
ATTENTION
For your own safety, read the instruction manual
DANGER
CAUTION
before using this machine
CAVEAT
4
CAVEAT
EN
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
machinery can cause permanent hearing loss.
MACHINE. Wood dust is carcinogenic, that is, it can cause cancer and severe respiratory
diseases.
4.
ALWAYS WEAR HEARING PROTECTION WHEN OPERATING THE MACHINE.
the noise of the
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
1. READ THE MANUAL IN ITS ENTIRETY BEFORE STARTING THE MACHINE. Machine
5. WEAR APPROPRIATE CLOTHING. DO NOT wear loose clothing, gloves, a tie, rings or
jewelry that can be caught in moving parts. If you have long hair, cover it with something
presents risks of serious injury to untrained users.
2. ALWAYS WEAR ANSI APPROVED SAFETY GLASSES WHEN
protection element and wear non-slip shoes.
6. REFRAIN FROM OPERATING THE MACHINE IF YOU ARE TIRED, UNDER THE INFLUENCE
OPERATE THE MACHINE.
Normal glasses only have impact resistant lenses. Are not
MAY cause minor or moderate injury. It can also be used to
warn against unsafe practices.
safety glasses.
OF ALCOHOL, DRUGS OR MEDICATION. Be mentally alert at all times.
3. ALWAYS WEAR AN ANSI APPROVED RESPIRATOR WHEN OPERATING THE
The purpose of safety symbols is to draw your attention to potentially dangerous situations. This
manual uses a series of symbols and verbal indications that are intended to convey the level of
importance of the safety messages. The progression of the symbols is described below. Remember
that safety messages by themselves do not eliminate hazards and are not a substitute for correct
accident protection measures.
This symbol is used to alert the user to useful information on the
correct operation of the machine.
SECTION 1: SAFETY