background image

EN

5

13.  USE  A  GROUNDED  EXTENSION  CORD  WITH  THE  CORRECT  AMPERAGE  FOR  THE

MACHINE.  

Underpowered  cables  overheat  and  lose  power.

11.  DO  NOT  USE  IN  HAZARDOUS  ENVIRONMENTS
12.  KEEP  WORK  AREA  CLEAN  AND  WELL  LIGHTED.  

Clutter  and  dark  areas  can  lead  to

accidents.

20.  DO  NOT  FORCE  MACHINERY.  

Work  at  the  speed  for  which  the  machine  or  attachment  is

designed.

Replace  extensions  if  damaged.  DO  NOT  use  extension  cords  for  220V  machinery.

21.  SECURE  THE  PIECE.  

Use  clamps  or  a  vise  to  hold  the  part  when  practical.  A  secure

piece  protects  your  hands  and  frees  them  to  operate  the  machine.

14.  ALWAYS  DISCONNECT  THE  MACHINE  FROM  THE  POWER  OUTLET  BEFORE

CARRYING  OUT  MAINTENANCE.  

Check  that  the  switch  is  in  the  OFF  position  before  

reconnecting.

22.  DO  NOT  STRETCH  YOUR  BODY.  

Always  maintain  a  firm  posture  and  balance.

23.  MANY  MACHINES  WILL  EJECT  THE  PART  TOWARDS  THE  OPERATOR.  

Be

aware  of  and  avoid  conditions  that  cause  part  kickback.

15.  ALWAYS  SUBJECT  THE  MACHINE  TO  A  GOOD  MAINTENANCE.  

Keep  blades  sharp

and  clean  for  safer  and  more  efficient  performance.  Follow  the  instructions  for  lubricating  and
changing  accessories.

7.  THE  MACHINE  SHALL  ONLY  BE  OPERATED  BY  TRAINED  AND  PROPERLY
SUPERVISED  PERSONNEL.  

Make  sure  that  the  safety  instructions  are  well  understood

and  guaranteed.

16.  CHECK  THAT  GUARDS  ARE  IN  PLACE  AND  OPERATE  PROPERLY  BEFORE

USING  MACHINERY.

24.  ALWAYS  ATTACH  MOBILE  BASES  (IF  USED)  BEFORE  OPERATING  MACHINERY.

8.  KEEP  CHILDREN  AND  THIRD  PARTIES  AWAY  FROM  THE  MACHINE.  

Children  and

visitors  must  remain  a  safe  distance  from  the  work  area.

17.  REMOVE  ADJUSTMENT  AND  SPANNER  WRENCHES.  

Always  check  the  adjusting

wrenches  and  wrenches  before  starting  the  machine.

25.  BE  AWARE  THAT  CERTAIN  WOODS  MAY  CAUSE  AN  ALLERGIC  REACTION  

in

people  and  animals,  especially  if  exposed  to  fine  dust.

10.  NEVER  LEAVE  A  MACHINE  ON.  

Press  the  OFF  switch  and  wait  for  the  machine  to  come

to  a  complete  stop  before  leaving  the  machine  unattended.

9.  WORKSHOP  MUST  BE  CHILDPROOF.  

Use  padlocks,  master  switches,  and  remove

keys  from  ignition  switches.

18.  BEFORE  USING  THE  MACHINERY,  CHECK  FOR  DAMAGED  PARTS.

Check  the  type  of  wood  dust  you  will  be  exposed  to  and  always  wear  an  approved  respirator.

19.  USE  THE  RECOMMENDED  ACCESSORIES.  

See  the  instruction  manual  for  more  information

on  recommended  accessories.  The  use  of  inappropriate  accessories  may  cause  risk  of  injury.

Check  the  fastening  and  alignment  of  the  parts,  that  none  of  them  are  broken,  the  assembly  of  the
parts,  that  the  bolts  are  tight  and  all  the  aspects  that  can  affect  the  operation  of  the  machine.

Repair  or  replace  affected  parts.

Содержание Anova BIO150D























Отзывы: