MILLASUR Anova BIO150D, Инструкция по эксплуатации и техническому обслуживанию

Страница: 15 / 22

15
Cleaning
Engine Maintenance
EN
Engine oil change
• Check the engine oil level.
Place the machine on a smooth surface and warm up the engine for a few minutes. Then turn off the
engine.
Every 100 hours of use or once a month, remove the air filter (Illustration 22)(22.1) and
check that it is not dirty or damaged. Clean the air filter thoroughly using an agent
Remove the oil filter plug (Illustration 8)(8.1)
Clean the machine after each use. Wait for the engine to cool down and remove the spark plug
wire. Brush or vacuum clean wood chips and sawdust from the outside of the machine with a dry
cloth. DO NOT get the shredder wet. Remove any debris or debris from the hopper and discharge
opening.
Place an oil pan under the engine. Remove the drain plug for the oil (Illustration 8) (8.2) in
order to completely drain the oil. You will need to use a pipe or similar device to prevent oil from
spilling onto the chipper frame.
Check the oil drain plug, valve, oil filter cap and O-ring. If any are damaged, replace them.
It will be much more difficult to clean the machine if you allow time to pass before cleaning it.
You may need to use an engine cleaner to remove resin buildup from the engine. You can find
engine cleaners at most auto parts stores.
• Check that the hopper, the hopper protection and the funnel do not have cracks, holes
Reinstall the oil drain plug.
or loose bolts.
Spark plug
Add engine oil to the upper level on the dipstick. (Illustration 9)(9.1)
• Check that none of the screws or bolts are loose or loose.
• Check for cracks or damage to the case chassis.
You will need to remove the spark plug every 50 hours of operation. Watch for the color of the
deposits on the end of the spark plug. They should be a “tan” color. Remove deposits using a stiff
brush, a wire brush would be ideal. Check the valve electrode gap (Illustration 21) (21.1) and adjust
if necessary. The correct separation will be between 0.7 and 0.8 mm.
Air filter
• Check blades and hammers for cracks or damage.
Illustration 21