Mikrotron EoSens CAMMC1186, Справочное руководство, Страница: 40 / 98

Acquisition Control
MIKROTRON GmbH 5 ‐ 6
TriggerActivation
Tip: If AnyEdge is selected, a
f i x e d e x p o s u r e t i m e
(ExposureMode = Timed)
has to be set.
This feature defines the activation mode for a trigger signal defined in
TriggerSelector.
TriggerCount
This feature counts the incoming trigger signals after a trigger
debounce. It allows e.g. to compare the number of frames transferred
to the frame grabber with the number of triggers.
Access
read / write
Type
enumeration
In
RisingEdge
Falling Edge
Any Edge
camera will start to acquire frames on the arrival
of a CXP 'trigger rising edge' trigger packet; this
activator expects a subsequent 'trigger falling
edge' trigger packet to finish the trigger
sequence
camera will start to acquire frames on the arrival
of a CXP 'trigger falling edge' trigger packet; this
activator expects a subsequent 'trigger rising
edge' trigger packet to finish the trigger
sequence
camera will start to acquire frames on the arrival
of a CXP 'trigger falling edge' as well as a 'trigger
rising edge' trigger packet
Out
The trigger signal is available at OUT0 of the connected camera.
The pulse width of the output signal equals to the set exposure
time. After exposure the out signal will be low
Remarks
Using the activator AnyEdge doubles the maximal trigger fre ‐
quency.
Access
read / write
Type
integer
In
min.
max.
0
0
zero is the only value accepted and is used to
reset the trigger counter
Out
number of counted trigger signals
Remark