Mikrotron EoSens CAMMC1186, Справочное руководство, Страница: 23 / 98

The 1.1CXP Camera
MIKROTRON GmbH 3 ‐ 5
Connecting a Frame Grabber
At the time being, the CoaXPress standard describes four connections
for data transmission between camera and frame grabber.
The transmission speed of a 1.1CXP camera can either be set to 3.125
,
5 or
6.25 Gbit/s.
The possible cable length depends on the cable type used,
its quality, and the selected transmission speed. The following table
gives examples. These values will only be reached if the signal quality
meets the requirements of the CXP
‐ 1.1 specification.
Tip: The maximal cable
length depends also on the
quality of the cables. We
recommend to buy best
quality e.g. CXP cables from
MIKROTRON.
Please, take into account that all lines have to be of the same length.
DIN Connector
In order to connect a 1.1CXP camera with a frame grabber you can
use any CoaXPress 1.1 compatible cable with DIN connector. MIKRO
‐
TRON offers cables with the following connectors. For more informa ‐
tion see " Optional Accessories " on page 2 ‐ 4.
• DIN

DIN
(cable KKRDDINDINxx/6Gx4)
• DIN

BNC
(cable KKRDDINBNCxx/6Gx4)
Note Please, carefully connect and release the socket with the
DIN1.1/2.3 connector. Connect them precisely to avoid
deformation of the connectors or other damages!
If connecting a frame grabber via DIN

BNC, keep the order from
left to right when connecting one, two, or four BNC connectors.
Tip: Pin 1 always has to be
connected.
If you look at the back of the camera, the left DIN connector is the
master connector number 1 (marked by a triangle). Connect it with
channel one of the frame grabber (please, read the frame grabber
documentation).
CXP ‐ Type
Transmission speed
[Gbit/s]
Max. cable length
RG59 style [m]
CXP ‐ 3 3.125 up to 100
CXP ‐ 5 5 up to 60
CXP ‐ 6 6.25 up to 40
4x CXP ‐ 6 4*6.25 = 25 up to 40