Mikrotron EoSens CAMMC1186, Справочное руководство, Страница: 20 / 98

The 1.1CXP Camera
MIKROTRON GmbH 3 ‐ 2
Camera Description
The 1.1CXP color and monochrome cameras can be ordered with the
following features:
The sensor of the color camera is covered with a Bayer filter in order
to get the RGB information of each pixel.
In addition, color cameras are equipped with an UV/IR cut filter. This
filter blocks UV light with wavelengths below 370 nm and reflects
infrared rays above 670 nm. The UV filter protects the sensor of the
camera. The IR filter reduces the IR rays to the visible part and thus
adjusts the image to the light sensitivity of the human eye. As a result
the color image looks more natural especially when artificial light
sources have to be used
.
Operating Temperature
Despite of its high performance, the fanless 1.1CXP camera is com ‐
pact and works noiselessly. Supposed, the camera is mounted on
mechanical parts, heat, generated during operation, will be dissipated
by the cooling fins at the rear of the camera and the mechanical parts.
Note The camera’s body temperature must not exceed 55 °C.
In case of overheating, the image quality will suffer and the probabil ‐
ity of bit errors increase.
Durability of the camera will be reduced when being operated in an
environment that is constantly exceeding 40 °C. In this case, take
additional cooling measures as described below.
Note The camera is not intended for use on an isolated mount ‐
ing plate or in a closed housing because the temperature
of the camera will rise continuously.
Type Data width
Mono: m
Color: c
Lens Adapter Link Speed
Max. fps@
1280x864
Connector
CAMMC1186 8/10 bit m C ‐ /F ‐ mount CXP ‐ 6 2050 fps DIN1.1/2.3
CAMMC1187 8/10 bit c C ‐ /F ‐ mount CXP ‐ 6 2050 fps DIN1.1/2.3